1. The whole EU streamlined design, heat treatment rack, high rigidity worktable, optional mechanical compensation device, to achieve precision bending.
2. Hydraulic synchronous control and Estun NC programmable logic controller ensure accurate repeatability and ease use.
3. Integrated hydraulic system (Bosch Rexroth Germany) allows automatically switch to slow bends in a quick way.
4. X axis and Y axis realize accurate positioning function by frequency converter through NC E21 system programming control.
5. Cutting-edge frequency response hydraulic control technology, more stable machine tools, more reliable operation.
6. The best ratio of parameters, optimal core configuration ensure stable performance, more convenient operation.
7. WC67K standard single-axis back gauge system and single-axis bending angle system, you can choose to add the V-axis compensation function, and select the appropriate mold to bend complex shape workpieces easily.

• Estun E21 NC control system
• Y-axis and X-axis system control adjustment
• Delta frequency converter controls the positioning of X axis and Y axis
• Using HIWIN ball screw and light bar to ensure the accuracy of 0.05mm.
• Front holder support
• Germany Bosch Rexroth hydraulic valve block
• Germany EMB oil tube connector
• Germany Siemens main motor
• France Schneider Electric
• Hydraulic and electrical overload protection
• Top and bottom dies (86 °, R0.6mm, material: 42CrMo)

• Backgauge control
• Control the common motor or inverter
• Intelligent positioning
• Holding pressure unloading time setting
• Workpiece counting
• 40 programs stored, 25 steps per program
• Unilateral positioning
• Concession function
• One-key backup / restore
• mm / inch
• Chinese / English

1. EN 12622:2009 + A1:2013
2. EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009Front finger protection (safety light curtain)
3. South Korea KACON foot switch (Safety grade 4)
4. Rear metal safetyguard and CE standard
5. Safety relay monitors foot switch, safety protection
6. Safety standards (2006/42 / EC):

Standard Configuration

CE Standard Electrical System

Schneider Electrics - France

Siemens Motor

Sunny Oil Pump-GermanyUSA

Bosch Rexroth Valve -Germany

Front supporter

Quick clamps

Quick clamps

Backgauge use ball screw and linear guide rail

Hight-precision fine-tuning back finger stopper

X Axis is driven by stepper motor and invetrer

Y Axis is driven by stepper motor and invetrer

Matters needing attention when bending:

A. The bending force of the workpiece must not be greater than the nominal force of the equipment. When working, one person should be in a unified command, so that the operator and the feeding and suppressing personnel should cooperate closely to ensure that the cooperating personnel can send out the bending signal in a safe position.

B. When bending the sheet, it should be placed in the middle of the equipment. The equipment should not be subjected to unilateral force, so as not to affect the accuracy of the workpiece and the equipment.